even if thats not quite right you could still pound on the lock.
nick where did you get your lugnuts from?
|
|
11-03-2011
even if thats not quite right you could still pound on the lock.
nick where did you get your lugnuts from?
11-03-2011
Go to a gm dealer. Many dealerships put wheels locks on when vehicles are having their pdi. If this was the case than your nearest gm dealership has a master set with all of the wheel lock keys in it. Go there and see if they have a key that fits it.good luck
Last edited by Curt7; 11-03-2011 at 07:48 PM. Reason: spelling mistake
11-03-2011
Originally Posted by Z34Phoenix
this might be close....
Chevy Avalanche Cladded 1500 M14x1.5 Wheel Lock kit OEM | eBay
these look even closer
Jeep Patriot Wheel Lock Kit 82211462 | eBay
There should be two different sizes. Truck and car wheels locks are different. No sense wasting your time getting an avalanche wheel lock kit. They key will be way too big.
11-03-2011
im just going to wait till the kit comes in if that dosnt work ill try the dealer. my locks look way shorter then those shown above. idk if the kit will work on mine now,. the ones above have alot more top then mine do. mine are really just stubs
01-09-2012
What I've done in the past when I worked at belletire, is using a air chisle, carefully make a groove/slit in the side/rim of the lock. Then use the chisle or hammer and screwdriver/whatever will do the trick to move it in a circular direction to break it free. Its not the best/safest way for ur wheel, but it does work!!
01-09-2012
lisle tool also makes a kit i had it at work once and if i remember it wasnt too expensive
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
