Im trying to do this to a 2" pvc cap (by this i mean put this groove in it).... i have no idea how to do such a perfect groove....
|
|
06-10-2011
Im trying to do this to a 2" pvc cap (by this i mean put this groove in it).... i have no idea how to do such a perfect groove....
06-10-2011
router?
dremel with a guide?
06-10-2011
what do u mean a dremel with a guide.... i also thought of a router but then i cant figure out how to set up a guide for that either?
06-10-2011
well a router in a table mounted at the right height with the correct bit would do that.
my dremel has a depth guide, like a router.
what are you building?
06-10-2011
its part of a retrofit project.... i know how to do the depth guide, but getting a perfect circle is what i prolly cant do
06-10-2011
take a square board cut a circle in the same size as your plug, set a router up to one side, then spin the cap to make the cut/
06-10-2011
what do you mean set the router up to one side?
06-10-2011
so the bit isnt in the center but offset from the center, then you spin the cap to cut it, do you know any machinists?
06-10-2011
my neighbor had some wood working experience with routers.... ill have to see what he knows.... im not really picturing what you are saying so ill have to see if he can help me visualize it
06-10-2011
Originally Posted by redlinepontiac
thats a great idea, in my mind the cap would go in the hole you cut, then hold the router inside the cap, thats in the hole in the board, cut it as close to the edge as you need, hold router in place while pushing up on the cap lightly spin it, perfect depth and thickness needed.
06-10-2011
lol so im not a re re, someone understands
06-10-2011
your description was sorta vague , so i thought i could paint a picture lol
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
