New idea.

[Koniig]

Well I've kind of been thinking about a new project.

I was thinking it would be kind of cool to take out my GXP turn signal housings and replacing them with the P6 projectors. I still need to get off my ass and go measure the diameter of the housings to see if this will even work to begin with.

Here's a few problems I have thought of thus far.

1. I would wire my turn signals into my high beams as Drunkie did, but I have no idea how to do so.

2. Where I would get power for them. I'm thinking I would get HID's and buy a relay harness and wire them directly to the battery.

What do you guys think? Would they be more trouble then they are worth?

I was just thinking it would be cool to run dual projector foglights and soon enough, projector headlights. Not the ****ty eBay ones, retrofit obviously

[Koniig]

Here's a picture of the turn signals for those unaware of where on the car they are located.



And heres the projectors. I would probably break them down a little more if need be.

UNIVERSAL P6 CLEAR PROJECTOR FOG LIGHTS FOGLIGHT KIT - eBay (item 250731017806 end time Dec-22-10 13:49:01 PST)

[BoostJunki3]

u already have projector fogs......leave well enough alone......

[Koniig]

Just an idea. Like I said.

[matt5112]

You have projector fogs?

I dont see a projector lens...

I'd do it.

P6's fit the 97-03's pretty well and they have a 4" opening.

[rocafella2032]

those two tiny inner fogs have projector lenses

[matt5112]

awesome.

[iroc2]

do it. for wiring, since they are just projectors and NOT HIDs just wire them like normal how your current fogs are now. if you did HID fogs on the other hand using those projector housings, wire the transformers into the original fog harnesses and then you should be all good

[Koniig]

You have projector fogs?

I dont see a projector lens...

I'd do it.

P6's fit the 97-03's pretty well and they have a 4" opening.

Yep the little lens on either side of the license plate in the lower grill of the picture I posted. Those are projector fog lights.

And yeah Joel I'm kind of thinking about it. It would look pretty bad ass...lol.

Just gotta get off my ass and measure the diameter. Might be a possible good project for winter break.