|
|
07-26-2010
ok so there are about 100 right ups on how to restore the headlights or how to paint the inside of the headlights... either way i have to restore the inside of the lens... every how-to write up seems to be about 97-03 or later... Because i have tried every method that is on the write ups and no success whatsoever... it seems that there is clips along with the silicon and everything and its about impossible
07-27-2010
i knew i had previously seen that somewhere, but couldn't find it. good job
i'm gonna need to do this soon to restore the plastic inside; seems like the passenger side headlight had gotten too hot at one point & it's become a bit foggy on top. i know it's something most people wouldn't notice unless they were looking for it, but little **** like that bugs the hell outta me...
Last edited by neyel8r; 07-27-2010 at 02:12 AM.
07-27-2010
I have did this when i painted mine,, just heat the over to 245 and leave light in there for 12-15mins,, a dremmel is a great tool to use when doing this also,, just pull pretty hard and it will separate..
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
