Be careful with that ****. Red paint fades quickly if not cleared, considering you're outside...
|
|
07-01-2010
Be careful with that ****. Red paint fades quickly if not cleared, considering you're outside...
07-01-2010
im clearcoating it in about 30 minutes
07-01-2010
At least it's a beautiful day for it...
07-01-2010
ITS DONE!!!!!
07-01-2010
Nice work!
Is it just me or does the spoiler look a little faded?
Is that the girlfriend likes .. Then you have the Gp 
07-01-2010
looks good!
07-01-2010
its just how the sun hits it, ill give it a couple of days, if i dont like it, imma take the spoiler off and redo it
07-01-2010
that some overspray on the passenger side of your rear window?
Otherwise, looks great.
07-01-2010
Wish I could do that
07-01-2010
rattle can?
07-01-2010
way to go girl, good job. forget all the negative, I am sure you know enough to take the problem area down to metal and then filler prime and paint. And besides if it does not work the first time you LEARN from it that is how people learn right? anyway good job
07-01-2010
u got itOriginally Posted by Ibwrong
rattle can?
07-01-2010
=/u got it
Bigger jobs like this, it would have been much better to use a paint gun. Once everything is set, your results will have been more desirable.
07-01-2010
Damnit you guys are negative. She did it herself, and even if she didn't do it to look exactly like a body/paint shop would have done, it looks significantly better compared to before.
Good job
07-01-2010
thx
07-01-2010
So you painted this and cleared it with rattle cans, looks good......
Now figure out how to weld, then install my daytona spoiler for me, please. I have a little surface rust (I hope), but need to also fill 6 and drill 3 holes iirc. To bad silvermist isn't in a can... *searching*
Nice
07-01-2010
Daytona Spoiler should fit stock holes afaik.So you painted this and cleared it with rattle cans, looks good......
Now figure out how to weld, then install my daytona spoiler for me, please. I have a little surface rust (I hope), but need to also fill 6 and drill 3 holes iirc. To bad silvermist isn't in a can... *searching*
Nice
07-03-2010
so.... today i tackled another rust issue, right under my gastank door. again not perfect, but im getting better the more i do it
needs some wetsanding and some more clear but so far im ok with it
before:
after:
07-03-2010
Looks like you need to sand around the door some more to smooth it out. Other than that good job.
07-03-2010
yup just a little.... thats tomorrows job
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
