Thread: Tails, Tinted And Spliced

Originally Posted by FoSHO99

If you do this mod the way it says to and splice/crimp properly, you shouldn't run into any problems at all. It's a pretty simple mod.

Agreed.
Take my advice, have the right tools to do with and you'll save a lot of heartache. I didn't have the proper wire cutters, tape, or any such.

Also make sure when you cut, that you cut the CORRECT end of the 194 wire. I made the mistake of cutting the wrong side on the passenger side, and had to cut the other end off, and "put it back" and then it was too short, so I had to remove part of ANOTHER wire.

Aka: Mine's a mess. Just have what you need to do it RIGHT.