Thread: Stealth amber signal bulbs?

Originally Posted by CTKGP09

you got the whole package!

I'm glad I went with the stealth bulb in the corners of the projectors. It blends in with the chrome. I got a little tired of seeing the yellow bulb sticking straight out when looking at the corner. You should consider getting a pair of stealth bulbs. They look much better in the corners with the chrome.

i know what you mean, im definatly gonna have to look into that, i still need to align the projectors, did yours fit properly?

Originally Posted by CTKGP09

i know what you mean, im definatly gonna have to look into that, i still need to align the projectors, did yours fit properly?

I got mine fitting pretty good as well as having them aimed just right. This is what I used to aim them. Also This guy posted this fix on getting rid of the bounce with the spyder projectors.

To align the projectors correctly first you need to:

1) Measure from the ground to little dot on the lens in front of projector.
2) Subtract 2.5 inches off that measurement, then make a mark on the wall, that your going to be aligning your headlights with.
3) Put your car 25 feet away from the wall trying to get as perpendicular to wall as possible.
4) Adjust the headlight so that the _______/ of the cut-off is level with your mark on the wall. And thats it for the height

For the width you measure from the middle of one projector to the other side. Take that measurement and get the step up on the cut-off 4 foot away from the other.

I could only get mine 2.5 feet away from each other before the gap between the center of the car and the corner of the headlight became too big.

Hope this helps.

it does thanks alot! thats my little project for tomorrow

tint the corners.....makes them look like completely diff lights .....hey guz how is that metal bounce brace attached to the housing? just an epoxy?

btw mine are aimed perfect you can stop the crossbeam problem by drilling the HL mounting holes toward the inside of the car more....

Originally Posted by BoostJunki3

tint the corners.....makes them look like completely diff lights .....hey guz how is that metal bounce brace attached to the housing? just an epoxy?

I saw this on club gp. Some other guy did it and he said it works great. I believe its velcro holding the bracket to the housing.

^^^i might try that...

well after tweeking for about 20mins, i got them to fit perfectly and they are bright fot halogen on a GP (i cant wait for HIDs tho) very happy now, thaks for the tips on aligment