Thread: blue interior led (pics)

does anyone have the write up on how to change the leds and what ones to use with what resistors for the dash lighting, door switches, or the hvac controls?

No write-up needed. Disassemble the switch, desolder the bulb, solder in the LED and resistor (use the formula I posted earlier in this thread to decide what resistor to use). Just make sure you use 14.4v as you voltage in the formula not 12v (since the system is at 14.4v when the engine is running and you don't want to over drive and burn out your LEDs).

Consult a service manual with wiring diagrams to decide the polarity of the LED. I used 3mm 13000+mcd LEDs.