|
sorta its pushin it they will fit but theres 2 different offsets on there,you need the highest offset you can get 24mm is gona be flush if not stick out a tad bit unless thats the look ur lookin for, atleast tryin get the 18x9s +35mm if you want them to sit close to stock
The 10" wheels won't fit. The widest you can go is 9". Look at the wheels with the higer offset as stated. The offset rang I would recommend is +35 to +40. The lower offset one's will stick out. Look at the wheels for an 05+ mustang. These have the higher offsets.
So something like this?
20" Fits Mustang (R) Bullitt Style Replica Wheels 2005 offset-Black-Rvt-Mach'd Lip-20x8.5-SET
yes them 20s will fit get a 245/35/20 or if ya wana be safe 235/35/20
id personally run with a 245/35/20 thats what i always put on all my cars grand prixs, but im sure bio gona disagree ,even tho ive owned over 30 gps![]()
come on, i never said they WONT work, but i was saying that there are BETTER ways to do it. the wider the wheel, the lower offset you have to go so you dont rub the strut hat. its also a double standard since wider wheels on a lower offset will also have a better chance to rub the fenders.
youre not doing anything special to make them fit like i had to do. like i said, i like my cars LOW with big wheels. that usually means rolling and pulling fenders and possibly running some fair amount of negative camber.
well wen sum1 wants 20s i dont think they wana lower ther car, although it is sweet to see car lowered on big rims ,
front of gps can fit a 255/30/22 without rubbin just did it today, the back will only take a 255/35/20 had to extend the rears it looks good not high either
i want sum1 to do the iroc rims 18s 20s or 22s cant wait ive been tryin to sell ppl them workin part tyme back at the my fams rim shop but no1 up here likes spokes/bars
I love the way these cars look sitting on 20's but I don't want to loose alot of performence how much do you think i will loose going to the 20's?
« Previous Thread | Next Thread » |
Tags for this Thread |