25-125+
Mustang has intake exhaust gears and tune with no passenger
Regal has 300lb cameraman
|
|
12-24-2011
25-125+
Mustang has intake exhaust gears and tune with no passenger
Regal has 300lb cameraman
12-24-2011
Nice.
12-24-2011
and the mods on the regal are....?
oh yeah congrats.
12-24-2011
its gotta be modded...
12-24-2011
xp cam, tvs1320, headers
12-25-2011
Good kill, inb4 the masses come in here and say "lulz it's a V6 mustang". A good portion of you guys couldn't hang with the 11 V6 mustangs....
Laugh it up.
12-25-2011
Good kill bro! Keep those mustang owners depressed and hanging their heads in disbelief! Hahahahaha
12-25-2011
I was surprised it was as quick as it was.
He showed me a video on his phone smashing an 05 GT by about 10 carlengths. I would really hate to have been that guy lol
12-25-2011
Sounded like two n/a cars battling it out. Good kill
12-25-2011
Nice kill! One of those pulled a half a car on me.
12-25-2011
Could be why he hung with me down low.
12-27-2011
Really nice run nick.
12-27-2011
339 SAE
350 STD
358 Actual
12-27-2011
it clearly says 334 right before you show the two pulls side by side.
And the pull before that is 327.
You mention you added two degrees of timing in the 339 pull.
Can you still run that timing on the street?
12-27-2011
The tires were wet and the car spun on the dyno when it made 327... 334 was after 5 minutes and 339 was 5 minutes after that with 2 degrees more timing. Those are the SAE figures... it made 358 uncorrected. That was pretty much untuned, since then I dialed in the AFR and was able to run a few more degrees.
I'm also switching to E85 very soon.
12-27-2011
Fair enough.
Interested in some third gear pulls.
12-27-2011
It would likely make more power with a 3rd gear pull, but the m90 pulls were done in 2nd so I stayed consistent for the comparison.
12-27-2011
racecar
12-27-2011
You should have raced the V6 Mustang to 136+ MPH, then his drive shaft would have fallen off!
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
