Thread: will these work?

Originally Posted by louisdamani

I don't know about the offset but, I have 19x8" Nissan Maxima wheels on my 2004+ GP GT2. The center bore is not the same as GM's GP so a shop will have to enlarge the center bore to the size of your car. It work out good. No vibrations or anything. Now bending one of the wheels with a Michigan pothole is another story!! Damn 40 series tires.

x2

Center is 66.1. Smaller then a GPs.

I had some 35th 350Z wheels on my s10 I wanted to put on my buick but didnt want to run spacers like I did on the s10. and ofcourse I know a place that bore's at rims now or I would have kept them. I love those rims.


BTW, love the Maxima 19s. Those are nice rims.

Originally Posted by Xanthous

Looks good louis, i like those wheels. So you guys don't think going with a more profile, less sidewall tire would look good on stock rims?

Noooooooooooooooooooooooooooooooooooooo.

Fathom this. Lets say you have 2 inches of wheel gap with stock sized tires. Now you put even smaller tires on.....

I shouldn't have to paint a picture here.

The only time to go with lower profile is when you go with larger diameter wheels.

Wheel gap is not aesthetically pleasing, unless you are driving a big lifted truck, but then you usually go with BIGGER tires in that case.