Thread: cobra rims?

Bolt pattern will work, but cobra rims are staggered IIRC, so the back ones would probably be too wide to fit w/o rubbing

are you referring to real cobra r's or aftermarket ones? either way theyre not staggered. real ones would be 17x8s and aftermarket are usually 17x9

Originally Posted by marlow331

are you referring to real cobra r's or aftermarket ones? either way theyre not staggered. real ones would be 17x8s and aftermarket are usually 17x9

Well then, the 17x8's should be ok, but the 17x9 will probably have rubbing issues w/o other work and or spacers

what year/style cobra r btw? 95, or 2000?

ya they will fit fine, many people run them. you will have to roll your fenders though

Originally Posted by 02BlueGT

Well then, the 17x8's should be ok, but the 17x9 will probably have rubbing issues w/o other work and or spacers

do you run cobra rims that you know this? 17x9 is fine, even with the +24mm offset ones. therefore, you are wrong.

Originally Posted by Bio248

do you run cobra rims that you know this? 17x9 is fine, even with the +24mm offset ones. therefore, you are wrong.

17x9's with the +24mm will not fit with out rubbing....im rubbing 03 cobra style 17x9s with a +26 mm offset and they rub slightlly.....you may be able to pull it off with a 245 wide tire im rubbing 255's and they are barely and i mean barely scrubbing the fenders...my fenders are rolled they hit up inside the the fender not the edge...

you can do it. i have faith in you.

Originally Posted by Bio248

you can do it. i have faith in you.

lol thanks man im gonna try dropping it and if the rubbing gets bad ill change tire sizes if its stil barely rubbing fukk it i can live with it

low cars with wide rims are the best.

X464335677446644. ^^