BCM (Body Control Module) Issues?

[1ATony]

I think the ign switch may have been blamed in the past as well. Have you pulled and looked at the headlight switch for any signs of heat etc?

Yah you may want to check the back of the headlight switch to see if it's melted, and also the wires that go to it to see if they have heated up.

[GMac1969]

I have not pulled the headlight switch but will do that. I didn't think about that as a possible reason in reading some of the other posts concerning the BCM that involved the same symptoms I am having. Thanks. Will get back with results and hopefully good ones...

[GMac1969]

Yah you may want to check the back of the headlight switch to see if it's melted, and also the wires that go to it to see if they have heated up.

Physically felt and inspected the back of the Headlight Switch and it is in good shape with no signs of heat or burns. I do, however, have an aftermarket set of headlights with Halo rings and such but have had NO issues with that. Maybe this might be the issue but there is no heating issue and all the bulbs work fine when working. I will replace with OEM headlights to see if this is the culprit and then look again at the BCM. Also, my inspection did not pass due to the Computer not being able to be read. (Another tell tale sign of BCM?)