what make year and model is the GP with the heated seat switches

[BillBoost37]

Right.. it's not too tough overall. Heck.. the way i'd do it would be to nab that section of a console out of a jy car.

Cut the two pieces, sit them in place and tape one side to hold. Then JB weld or plastic weld them together. Sand the top lightly to make it nice and smooth. Then use SEM texture paint, knock a little of that down and then SEM graphite paint it to match the interior color. Presto..

Here's a teaser from Bonneville days

[tcman49]

My 2001 GTP has the driver side seat heated, best option I have ever bought on a car, during the Chicago winter's it is awesome, keeps my buns toasty, especially on my leather seats.

[SnowDrift]

I've successfully (nearly) completed this project with Bill's help from multiple PMs and posts on the forum so all could read the tips. Mine looks about as factory as possible, down to the factory wire connectors for easy and quick seat removal. I'm down to needing a couple finishing touches on my switch bezel and it will be totally done. If any photos are needed, I probably have them and can give detailed input, as this is still VERY fresh in my mind. Bill helped me, and I'm more than willing to pass on the information, as well to the benefit of all.