Few questions for a total audio n00b

[Rkrajnov]

I've been down this road. Those are definitely fakes. We have a problem with a guy who resells those speakers for $250 on DIYmobileaudio.com

I was almost taken too.

The box is a DEAD give away. If you ever have the chance to check out a dealer who is local, go look.

Was searching through classifieds on DIYMA and came across a thread made by you lol. Too bad I didn't want these a few months ago. 225 is a steal compared to anything I'm finding.

[musicmaster20102000]

if i where u id leave the speakers alone i just put in new back ones and its a wireing mess cause theres 4 wires going to each speaker and with aftermarket speakers u only use 2 its a mess

[musicmaster20102000]

OMG i need to wnow where u got your sub box ive been looking for one that would fit my car like that

[whiney]

OMG i need to wnow where u got your sub box ive been looking for one that would fit my car like that

You cant buy those, that was made custom...

[matt5112]

My trunk is cleaner...

[Rkrajnov]

My trunk is cleaner...

what would you recommend doing with the amps/crossovers to maximize trunk space?

[matt5112]

That was a blatant lie lol.

Its a giant mess of wires.

Some not even hooked up to anything.

follow rob's example.

[I800C0LLECT]

Sound Deadener Showdown - Your Source for Sound Deadening Products and Information

Basic rule of thumb with CLD tiles(Dynamat, Raamat, Hushmat, etc) is that 25% coverage of the center panel of a problem area moves 90% of the resonance to a lower frequency.

[Rkrajnov]

Sound Deadener Showdown - Your Source for Sound Deadening Products and Information

Basic rule of thumb with CLD tiles(Dynamat, Raamat, Hushmat, etc) is that 25% coverage of the center panel of a problem area moves 90% of the resonance to a lower frequency.

so does that mean i should only cover about 25% of the trunk? And what part should I cover then? haha sorry I'm a little confused here. Maybe I didn't look in the right place but I couldn't find much relevant in that link. It sounds like it should have reviews from the sounds of it but I didn't see any.

[matt5112]

Sound Deadener Showdown - Your Source for Sound Deadening Products and Information

Basic rule of thumb with CLD tiles(Dynamat, Raamat, Hushmat, etc) is that 25% coverage of the center panel of a problem area moves 90% of the resonance to a lower frequency.

Thanks for the link. Lost it

[I800C0LLECT]

He explains exactly how to "deaden" and lower the ambient noise in your vehicle. Read the front page carefully and go through the site.

[I800C0LLECT]

Before you mount those suckers you BETTER position them with a putty or something just to see if you like the sound. On axis vs. off axis response of a tweeter can make it or break it when next to glass. Please try them out first...move them around to see what sounds best using the passive crossover.

[Rkrajnov]

Before you mount those suckers you BETTER position them with a putty or something just to see if you like the sound. On axis vs. off axis response of a tweeter can make it or break it when next to glass. Please try them out first...move them around to see what sounds best using the passive crossover.

thanks for the advice