there are 2 metal clips on the back of the wheel, there is a special tool for removing them that makes it easy, but a small allen wrench works if careful
|
|
03-31-2008
there are 2 metal clips on the back of the wheel, there is a special tool for removing them that makes it easy, but a small allen wrench works if careful
03-31-2008
Cool. Thanks for the heads up.
Has anyone else replaced the non-RSWC wheel with a RSWC wheel?
I do have the pigtail harness under the dash for SWC, and the clockspring with the pigtail for RSWC (Though from a MC).
The wiring seems to be identical between the GP/MC, so I shouldn't have an issue there. Is there anything else I should be aware of?
I'm putting in my PAC SWI-PS that I had installed on my MC.
Does anyone know how to properly align the clockspring when I install it?
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
