How To Wire Halos In Projector Headlights

[PumpkinsGPGT]

those are so sick but a buddy of mine got some from ebay and they like fell apart, im scared im gonna get ****ed by someone on ebay. has anybody had any problems with theirs?

No not at all. Are you sure your didnt buy false ones? My friend did that to "save money" and the lights burned holes through the light covers LOL. The worst Ive had is the rubber seal around them had came off but it was an easy fix

[happysol]

I have succesfully taken a set of the projectors apart and put them back together again. I bought the black housing ones from ebay and didn't care for the black housings on my wife's silver GP so I took them apart and color matched the housings to the silver of the car. I will be changing the color of the halos soon and no you don't have to take the headlight apart to change the halo color. The LEDs that illuminate the halos come out the bottom of the headlight (or at least on the ones I have they do). PICs to come soon!! Maybe I will do a write up on how to take them apart. I also made my halos and 3 LEDs in my headlights my DRL's. Think I should do a how-to on that too??

[Dzebold]

Happysol,
Yes please! Do a writeup! Im gonna put up a post soon asking if anyone knows how to wire a Bi-Xenon HID kit to the spyder projectors that everyone in here loves so much. I too, would want the DRLs as the halos and fully functioning Hi/Low beams. Still too new at this stuff to be fully confident with all this but I'm learning fast I hope.