Another thing that comes to mind is a clogged heater core, or if you have dual HVAC then maybe a blend door actuator is messed up?
Also, here is a thread I found that may help-> I have no heat! Tried everything...
|
Another thing that comes to mind is a clogged heater core, or if you have dual HVAC then maybe a blend door actuator is messed up?
Also, here is a thread I found that may help-> I have no heat! Tried everything...
Last edited by FordMan77; 01-11-2025 at 12:57 AM.
thanks for that!
I have heat but just not the blaring turn down the heat heat and the temp gage is a bit lower than 1/4.
this morning I decided fun in the cold would be fun! LOLOL
I flushed the heater core, which seems to have given me back the ,"dam I gotta turn down the heat" back- yay!!
burped the system again and think I have all the air out... but Ive been told I'm not good at thinking.
temp gage moved up a bit to just above 1/4 but something I noticed when burping the system:
I had done some driving so everything was up to temp. cracked the rad cap and there was no pressure. gonna go get a new rad cap and see what happens.
on another note- just surpassed 250,000 miles!
« Previous Thread | Next Thread » |
Tags for this Thread |