Car running LEAN right after it was running fine for what reason?

[bandook]

older hp tuner software will open the bins. something like 2.2, pretty sure it's in bill's dropbox

So I open bin, save it as .hpt, then I can edit it with current hpt and flash to my car? I'm more worried about bricking my pcm or something. Or would I have to buy more credits to flash what was once a bin?

[SgtMarshal]

I would stick with the older software if it's an option, do you have the newer version of hp tuner, the one that connects via bluetooth?

[Scottydoggs]

ok then, so take that bin copy it, make a edited one in TT, then dl hpt 2.2 open and save it. it will save as a .hpt, then you can flash it.

[Scottydoggs]

Dropbox - VCMSuite-2_2_0.msi - Simplify your life should get you to a old 2.2 hpt install

or this is the whole hpt folder to pick from. Dropbox - HPT software - Simplify your life

[bandook]

Thanks, Scotty. I have bills DB saved. I tried installing, but it requires Net Framework 1.1. Might be a pita to install it on Win10, but i'll figure it out.

[Scottydoggs]

its in the folder there, just install it, it wont hurt anything. or you can google it and get it for free off the microsoft site.

[bandook]

I would stick with the older software if it's an option, do you have the newer version of hp tuner, the one that connects via bluetooth?

Yeah I have MPVI2 standard.

[Scottydoggs]

the latest unit may not run the older vs.

[SgtMarshal]

Yeah I have MPVI2 standard.

is it a cable or does it use bluetooth to connect?

[bandook]

Cable. I haven't even looked at the bluetooth feature. Thought that was just for the track app. I just opened it, plugged it in and started tuning.

Scotty, I'll figure it out. But 2.2 is giving Win 10 issues. I got the 2.22 installed but it crashes and won't save the bin.

[Scottydoggs]

might have to do one of them deals where you tell it to run in XP or win 7.

[bandook]

the latest unit may not run the older vs.

Wouldn't it be backwards compatible? I was thinking i should be able to just open the .bin on 2.2, save as .hpt, then open in latest version, make changes, save, flash to car.

[Scottydoggs]

you might have to flash witht he old vs. i had to upgrade my editor to see your hpt file. and the one im on is pretty new, so it might not even open it.

[bandook]

Back to my original issue, who's running a HAI?

[Scottydoggs]

i do.

[bandook]

Yeah but you got meth. Cheater! Honestly though, I think I'm good for one more mod. It's between rockers or meth. I almost had a set of used 1.9's but the dude backed out.

What are your normal IAT's on a warm day?

[bandook]

BTW, you need to paint them bones. Yellow?

[bandook]

What's that copper tubing under your tensioner bracket?

[Scottydoggs]

thats my fuel rail. its a custom cut chop rebuild of a stock rail.

my ait's are hot if sitting, but dont really affect my trims. im like -5 or lower all the time. and they are still the same after the n* and new maf with ait built into it.

[bandook]

That's awesome, forgot all about the diy fuel rails. I need to figure out a better way to attach the stock lines to the l67 fuel rail. They don't leak puddles, but I can always smell corn vapor from the slip on connection. Wiggle them and they leak.

Do you still have a hood liner? I'm thinking of ways to remove engine heat. That and wrap headers. Only my crossover is wrapped.

Looking at this wrap.