Tie-Rods. Correct Order of Operations

[CHI2000GTP]

Just thread the new outer onto the rack and then set it in the knuckle. Tighten it all up and get it aligned. Done. The inner tie rod moves with the knuckle so you aren't jamming a thing.

Just thread the new outer onto the rack and then set it in the knuckle. Tighten it all up and get it aligned. Done. The inner tie rod moves with the knuckle so you aren't jamming a thing.

Ten-4 on all that. Sounds like I'm over thinking this, when it's really just plug-n-play. I'll count the turns to get both sides even.