The Datalogging is the same between DHP and Torque. I'm not sure they are both off but they will show the same information. So what is the time period? If 85% of 20ms then the time period is 23.5ms? Could it different a time period for 04+?
Basically if the time period is 1 second and you have a pulse width is 75% duty cycle then the pulse is 750ms
If the time period is 100 ms and the pulse with is 80% then the pulse is 80ms
It seemed to do this with the stock setup as well but we'll see. I was just wondering that the time period is.
Jeff
