Some more top swap questions! Yay!

[Tonkin2000GT]

Follow the sticker all gm rocker bolts are tq then the 90° even the stock ones it says it right in the Haynes manual I don't know where 25ft lbs came from.

Sent from my SM-G920V using Tapatalk

[Scottydoggs]

25 ft lbs is the spec for a re usable rocker bolt. done it a few times now, they dont go no where.

[duswickware]

I've had no issues with mine, same ones torqued to 25 lbs

[suitercrew]

Ok so i was putting my rear header in and went to connect the o2 extension and they sent me the wrong one. So can i just get some wire, cut and solder the old harness?

Sent from my LG-D851 using Tapatalk

[Scottydoggs]

you can cut the plug off the cars harness and make it longer from that side. you cant cut the o2 sensor wires. one is ss.

make sure you beat the fire wall for the o2. or you'll be sorry later on.

[suitercrew]

Thanks for the info scotty! Does anyone know which wires you splice for new map plug

Sent from my LG-D851 using Tapatalk

[Tonkin2000GT]

Zzp sells a 2 bar map that plugs right in to your harness

Sent from my SM-G920V using Tapatalk

[suitercrew]

Well i have the l67 plug not the 2 bar map lol

Sent from my LG-D851 using Tapatalk

[suitercrew]

Hey how do i break the crank bolt. No i dont have a impact

Sent from my LG-D851 using Tapatalk

[Scottydoggs]

you should have taken that off first, while it ran still. could have done the redneck method.

now you'll need vice grips on the flex a breaker bar and a pipe.

[suitercrew]

Whats the flex?

Sent from my LG-D851 using Tapatalk

[Scottydoggs]

the round thing with teeth on it for the starter. flex plate.

take the plastic cover off the bottom, a few 10mm bolts, then take the starter off, then vice grip the fat part of the flex near the teeth really tight.

[Tonkin2000GT]

Lmao good luck with that whatever you do don't ruin the flex plate best to try and get a impact

Sent from my SM-G920V using Tapatalk

[suitercrew]

Im just gonna put it all back together and use the starter to break the crank bolt

Sent from my LG-D851 using Tapatalk

[Tonkin2000GT]

I'd try and get a impact you do have to impact the new one on to

Sent from my SM-G920V using Tapatalk

[SubwayGuy]

I'm sure any auto parts store will rent you one.

[suitercrew]

Ok ill check in on the rental!

Sent from my LG-D851 using Tapatalk

[Tonkin2000GT]

I've never heard of a auto parts store renting one? You can buy a cheaper one if you have a air compressor do you have a harbor freight?

Sent from my SM-G920V using Tapatalk

[suitercrew]

Ya i have a harbour freight but my dad has an impact but he didnt think his would get it off because its one of the cheaper ones

Sent from my LG-D851 using Tapatalk

[SubwayGuy]

I've never heard of a auto parts store renting one? You can buy a cheaper one if you have a air compressor do you have a harbor freight?

Sent from my SM-G920V using Tapatalk

They rent every other tool, why not an impact?