Some more top swap questions! Yay!

[SgtMarshal]

Hey so i was looking on wbody store and they actually make the wiring conversion for the map sensor but it also comes with the wiring for the boost bypass selonoid which i dont have and havent heard anything about it. So do i need this bbs for my swap?

Sent from my LG-D851 using Tapatalk

you don't need a boost bypass valve solenoid. its job is to cut boost while you are in reverse and when the traction control activates. sometimes it causes issues with boost, and you don't have as much as you should, so a lot of people do the delete. ZZP has the gasket kit, but if you look on rock auto you can find the complete gasket kit cheaper. some gaskets can get reused, others absolutely can not, like head gaskets.

[Impala131]

you don't need a boost bypass valve solenoid. its job is to cut boost while you are in reverse and when the traction control activates. sometimes it causes issues with boost, and you don't have as much as you should, so a lot of people do the delete. ZZP has the gasket kit, but if you look on rock auto you can find the complete gasket kit cheaper. some gaskets can get reused, others absolutely can not, like head gaskets.

On that note, remember that head bolts and rocker bolts must also be brand new. They are one-time use items.