Quote Originally Posted by GoldGTP View Post
Thanks for the reply...

I did remove the LIM a few weeks ago to recheck the work I previously had done and the only thing I can say is the supercharger gasket was "wet" again...

Also, the manifold itself was pretty nasty where the coolant touches (blocked off ports?) and was pitted pretty badly...Maybe this is where the leak/air intrusion is?

I also see wetness along the rear most head along the back seam/drivers side, this is why I am leaning to possible head gasket issue...

I don't mind pulling the LIM again, gotten pretty quick at that now...I think if i do it again, i will use the later model SC plenum gasket as those two little yellow o-rings always gave me heartburn as to "if they moved or not" when putting the SC back in place...

Thanks again all, I'll post back if i get it fixed...
Sounds to me like the coolant is leaking out under the supercharger.