Quote Originally Posted by tdm571 View Post
I was able to cut thru the bolt. I only dulled two blades. The size of the bolt is M14-2.00 90mm. I used a metric 10.9 grade bolt which is the equivalent of a grade 8. I also decided to upgrade the sway bar while I was at it. There's a huge difference in the tightness of the steering. Glad I did it.
I'm getting ready to do this job on my '06 GP base. Does anyone know all the bolt sizes for the LCA? I'd like to replace them all when I swap them out but would like to have them on hand. The car is my daily drive so I'm not running to the store once I start tearing things apart.