How to- Retrofit Projectors 97-03 GP

[Bronco Boy]

My question to you Bronco, is the insides of that brand seem identical on the insides or are they different as well.

They appear to be the same as the OE one's.

Also Bronco the last pic on your link says vertical hotspot tuning, what is that? what does the circle represent in the pics? I assume the line is the cutoff from the shutter.

It is proper alignment of the projector. The hot spot is the center/brightest part of the light. The circle represents the hot spot of my halogen bulb:





And here the hot spot of the projector is slightly to the left and to high compaired to the halogen hot spot:

[Fixedwing1]

They appear to be the same as the OE one's.




It is proper alignment of the projector. The hot spot is the center/brightest part of the light. The circle represents the hot spot of my halogen bulb:





And here the hot spot of the projector is slightly to the left and to high compaired to the halogen hot spot:

Oh ok that makes sense. Could you do me a favor and give me the exact part numbers you ordered on those assemblies so I can make sure to get the same? Did you order the reg stock or CAPA certified?

[Bronco Boy]

Oh ok that makes sense. Could you do me a favor and give me the exact part numbers you ordered on those assemblies so I can make sure to get the same? Did you order the reg stock or CAPA certified?

I got them from Rock Auto. #'s are in the link I posted......




Here's a link to RockAuto: http://www.rockauto.com/catalog/rafr...parttype=10762