Quote Originally Posted by REDCOMPG View Post
It was on page 13 .

To answer your question, yes it would fit, notice how option #1 lets you add a downpipe.

The exhaust itself isn't restrictive past the the ubend area but your eliminating that w/ the downpipe. The rest flows just fine till about 300-350hp then that's when it debatable that it becomes restrictive. Most will never reach that point.

Most would just do headers and leave the rest of the exhaust alone unless they're going for a different tone

What I would do is leave the stock exhaust if your wanting a better tone just cut off the stock mufflers and replace w/ (insert brand of your choice) and have them welded on. Saves you a bunch of money and the ZZP exhaust is excessive loud... I wouldn't go that route you'll need up hating it quickly
So when I made this thread, I also sent out an email to ZZP. Just got a response.
The downpipe you ordered has a 2.5” exit, so you need either a 2.5” catback, a custom 2.5” inlet on a 3” catback, or to send the downpipe back in so I can put a 3” exit on it.
But from what we've talked about, there's no point in me going thru the hassle of sending it back or even getting a 3" catback until ~350 whp? My intentions atm for my car are a 3.4 setup. Probably will stop there, at least for awhile.