Led trunk light

[Grandprix202]

What ground did you have to look at... Where is it at?

Sent from my Galaxy Nexus using Tapatalk 4

[Bronco Boy]

What ground did you have to look at... Where is it at?

I just tapped into the wiring at the stock light. I had an issue with the wiring at the trunk release on the lid; I could wiggle the plug and make the trunk light go on/off/dim. I snugged up the terminals in the plug (fixing the bad ground), and it has worked fine for over two years.

My LED Trunk Light Install

[Grandprix202]

I just tapped into the wiring at the stock light. I had an issue with the wiring at the trunk release on the lid; I could wiggle the plug and make the trunk light go on/off/dim. I snugged up the terminals in the plug (fixing the bad ground), and it has worked fine for over two years.

My LED Trunk Light Install

Yea me to I just snipped and spliced the wire going into the stock bulb... So I have to mess with the truck opening? Sorry I'm a little confused

Sent from my Galaxy Nexus using Tapatalk 4

[Bronco Boy]

So I have to mess with the truck opening?

Possibly. I had to, but I couldn't find any info on the matter so it may not be a "common issue".

The BCM turns on the light when the trunk latch is opened; I believe the wires are red/black for the trunk light at the latch. Wiggle the plug to see if your light changes.

If it does, there is your problem.

If it doesn't, you have more work to do.