HELLO I AM NEW FROM INDY AND I Need Some Help...

[Jays24]

Thanks Matt

[Jays24]

Do the sway support the axle

[Matt Palm]

no i answered this already

[Jays24]

Could I put my Prix on the highway without a sway

[Matt Palm]

yes you will be fine you wont blow up and die

[Jays24]

Is it easy to repair that me a female can do it

[Matt Palm]

you will need two peopel to do it

[Jays24]

Oh okay...how long will the axle last once it starts leaking grease

[Matt Palm]

not long

[Jays24]

How much will it cost to replace

[Jays24]

Thanks everyone for the feedback

[Scottydoggs]

you will need two peopel to do it

you do not need another person, i did mine solo. dont know why people cant thread it through alone, i did.

[BillBoost37]

I've done a lot of these bars by myself. It's an easy swap. I think Matt Palm is a wuss.

[Jays24]

So I can do it myself....that's good to know

[BillBoost37]

Sure can.. it's the endlinks (stock are 13mm) and some 15mm bolts holding the center bushings. A ratcheting wrench is a great tool for the bushings.

[Jays24]

How can I cut sway bar off....

[Jays24]

I just looked and the bolt that holds the bushing is broke

[Jays24]

Okay...I got it off now I am hearing a rubbing sound by the drivers side brakes...

[Slick2500]

Did you take the end links off?
Here is a video for replacing the sway bar. How To Install Replace Broken Sway Bar Impala Venture Montana Grand Prix 97-05 1AAuto.com - YouTube
Here is a how to remove the axle. http://www.grandprixforums.net/how-r...xle-39805.html

[dsmuts]

Where are you at in IN? I could help you out if you're not to far away.