Well guy's i thought i might update this as i finally finished my retrofit completeley. I ended up taking my turn signal housing's apart as well and painting them flat black to match the headlight's came out great i think. was gonna do led arrow's but when i photoshopped it i deff didn't like the look. Also clamped the housing's no leaking yet 250 degree's for 5 mins. then let cool for half hr.
VHT high temp paint(painted the housing's with 4 coat's each assembly)
[IMG=http://imageshack.us/a/img850/296/dipit.jpg][/IMG]

Uploaded with ImageShack.us
Next i went and got all the old sealant out with a screwdriver and also used little bit or gorilla super glue for the orange arrow because normally it just sit's in there.
[IMG=http://imageshack.us/a/img829/8499/beforeafterpic.jpg][/IMG]

Uploaded with ImageShack.us
While i was just finishing up the turn signal's i thought since i had them done sealed after waiting to harden up. I went and sealed/clamped the headlight housing's.
[IMG=http://imageshack.us/a/img18/1858/clampedone.jpg][/IMG]

Uploaded with ImageShack.us
Final shot of everything done. The second picture reason why light came out blue something off my flash reflected from my cell phone i think. There pure white 5k.
[IMG=http://imageshack.us/a/img248/3388/sgreat.jpg][/IMG]

Uploaded with ImageShack.us Hope you guy's enjoy the write up/pics.