Parameters to look at on torque app

[K Kraziee]

I know that boost/vacuum and KR are a must, but what else do you guy's look at while daily driving?

[cmal37]

I have fuel trims, engine and trans temp, percent throttle, IAT temp, AFR, and timing. Then I have a whole spark plug page, for current and history of missfires

[K Kraziee]

Nice, I tried logging afr but it wouldn't let me do i need a wideband connected? Also it seem's like I can't get a lot of parameter's that other's can get like Trans Temp, AFR, Oil pressure, and Oil temp among other's. I do have a tuned pcm if that makes any difference.

[cmal37]

did you go to settings and set it to the GM settings?

Settings>Manage extra PIDs/Sensors> Add Predefined Set> Pontiac/GM/Opel/Vauxhall

That should load all the sensors associated with the car so you can monitor pretty much everything. Some things dont work. I couldnt get oil pressure to work

[Fivefingerdeathpunch]

Air fuel ratio/lambda readings would need to come from an actual gauge for a wideband/lambda sensor. A phone app can't do that.


And our cars couldnt read oil pressure either as its only got a dummy light, not a real sensor for reading psi.

[K Kraziee]

ugh that's lame considering oil pressure it pretty important. I'll try the GM setting and see where that gets me.

[nos4blood70]

My Bonneville reads oil pressure. In any case, I have coolant/trans temp, IAT, KR and some other stuff. Battery voltage.

[dsmuts]

bonnevilles got a real sensor.