Info on the car:
L26 swap, L32 heads, ported GenIII, 1.84 YT rockers, Plog/3"DP, stock pulley, 180* thermo, stock tranny

I think I have my MAF tables dialed in pretty good, while I have the tuning file flashed to get the part throttle dialed in it won't read LTFTs, with the standard tune they're -5 to 0, WOT MAF section was at 0 when I tuned that to 11.0.

I started tuning the timing, got some knock so I backed it down some on the stock table in the areas of knock, none at part throttle BTW. I did some scanning on the way to work, ~10 min drive, and did a couple of pulls with downshifts, and I spiked at 8* I believe when last night I only got 2* IIRC.

After work I loaded the 05+ timing tables and scanned on the way home. Did a pull from 1st gear and I only 1* of knock, did a 3rd-1st downshift and once again got something like 8*, it did the same thing on a 2nd-1st shift.

Am I looking at false knock issues?

If someone tells me how I'll upload my tunes and both scans