Thread: which torque management table to retard timing at shifts?

Someone refresh my memory on which torque management table-under fuel, spark, tranny where you set how much timing to retard at the shifts? On the tranny take I have the bottom portion from 18step ft/lb to 32 step ft/lb at 13% for the 2-3 upshift, but when I go out and do a wot I still don't see the car pulling timing. This is via powrtuner. Tia

Which Tunnnnaaaaa?

sorry dhp powrtunaa

Doggy Horse Powah... Hmmm I'm thinking I remember that under the area of TQ Mgmt, doesn't DHP have a section just for that?

well they have it under fuel, spark, and transmission sections
like mentioned i increased the percentage under the tranny folder starting from the 22ft/lb step to 32ft/lb step 8% ro 13% but did not notice any sigsn of the pcm retarding more timing at the 2-3 upshift. so curious if im missing something?

under transmission / Torque Mgmt / Max_Engine_Torque_For_Upshift