Why cant I see parameters

**deangtp** · 04-09-2008

I cant see 02 readings and vac/boost. I cant see some other parameters either. I have the right OSID in there. What gives

**Andrew_99GTP** · 04-09-2008

How about some info? What car, scanner, things like that?

**deangtp** · 04-10-2008

Its a 2000 Pontiac Grand Prix GTP. It has a 2004 GT block, XP cam, 105's, dbl rlr, P&P heads/LIM/Gen V. I am using the Powertuner via the OBD2 port.

**Andrew_99GTP** · 04-10-2008

I have had that same problem with my pt a couple times too. I can't remember what I all did though. I know if you have too many of the little windows open at one time it screws things up. I am talking about the little parameter windows. Have you tried closing all the parameter windows and starting over?

**Zef_66** · 04-10-2008

Originally Posted by Andrew_99GTP

I have had that same problem with my pt a couple times too. I can't remember what I all did though. I know if you have too many of the little windows open at one time it screws things up. I am talking about the little parameter windows. Have you tried closing all the parameter windows and starting over?

Yup, this was my thought. I was trying to pinpoint a misfire. So I had all of my regular PIDs. Then added the misfire ones, and the misfire histories. Ended up being too much and wouldn't scan anything. Got rid of the PIDs I didn't need, and all was well again. Stumped me for a bit though.

**Andrew_99GTP** · 04-10-2008

I was trying to do a case learn with too many windows open, had me not only stumped but very

Thread: Why cant I see parameters

Thread Tools

Display

Hybrid View

Bookmarks