ZZP PCM's

**bevernden** · 03-26-2008

I read that you are affiliated with ZZPerformance.com. Are the PCMs they sell your's? Is that the best way to get one if I live in the states?

I have a 3800performance.com PCM. What would I benefit by using your PCM tuning?

**WillOverkill** · 03-26-2008

We are a Canadian distributor for ZZPerformance that is correct. Our PCMs are entirely different products however.

The best way to get one of our PCMs is order directly off our website. It is in Canadian currency which means it's a little cheaper for any US purchasers, and we'll honour the shipping prices etc for anyone purchasing in continental USA.

Lots of our customers have purchased from within the United States, we send a lot of PCMs to the US, so please do be confident that you'll be taken care of when ordering from our site!

Any questions, please do email at willoverkill@gmail.com and here's a direct link to our L67 PCM product page: :: Overkill Motorsports ::

3800Performance PCMs are DHP computers correct? If so then yes you'll notice driveability differences immediately, and if you have more modifications than the DHP was originally designed for (CAI, Ubend, 3.4" pulley), you will see horsepower gains at full throttle.

**Iron Indian** · 03-27-2008

You'll see nice gains with Wills PCM. Its the best on a market. This coming from a former DHP 1.0 owner. I have Overkill PCMs in both of my GTPs...

**chico** · 10-20-2008

I'm running a ZZP PCM with the SS M-90 kit ,SSIC ,cam 3.5 pulley it seems to work well ,would your tuning be of any benifit to me.Chico

**GTP4** · 10-20-2008

I'm also interested in one of you'r pcms.
My mods are as follows:
TOGs//Stge III ZZP Blower//LS1 tb// 85 maf//XP cam //105lb spings//3" Dp& high flowcat//3.2"//Ud plly//Msd wires//Aut 103's//CAI//DHP 1.0 Power tuned

I currently have a DPH 1.0 power tuned by a local member.
Would i benefit from one of you'r pcms and how??

**WillOverkill** · 10-27-2008

If you have access to tuning software, you may be able to dial in the PCM better than we can.

The advantage of our PCM however is a lot of vital tables for fueling, transmission, spark advance, even control of the engine cooling fans are much different than factory. We focus a lot on driveability improvements and refinement, and have extensive experience of the weak links in the factory coding that are not addressed by many amateur tuners.

If you have a custom tune and can provide us with the fuel injector tables and MAF tables that you used to dial in your fuel trims, we can plug those in to our PCM calibration. Keep in mind that our tunes are locked, you won't be able to read or edit them with your tuner; you can however sell the tuner and make money in the switch!