Thread: Junkyard rescue of an '87 Dodge Power Ram 50

Page 3 of 14 FirstFirst 1234513 ... LastLast
Results 41 to 60 of 276
  1. #41 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    I break things. WarStryker13's Avatar
    Join Date
    Oct 2014
    Location
    Frederick, MD
    Posts
    2,690
    Thanks (Received)
    4
    Likes (Received)
    38
    Dislikes (Received)
    1
    Mine took almost two weeks to dry out, but without sun I had to lay it out inside.

    I love how simple this truck is.

    2019-03-14_06-59-05 by Ben Stryker, on Flickr

    That's the entire internals of the transmission.

    2019-03-14_06-59-25 by Ben Stryker, on Flickr

    There's a clearer view of the upper gears and the synchros, there's very little indication of the 200k miles this truck has seen.

    04 GP GT2: Handling upgrades, go-slow parts, and an attitude. Totaled.
    87 Dodge Ram 50:​ Junkyard rescue, resurrection in progress.
    Reply With Quote  
     

  2. Likes Scottydoggs liked this post
  3. #42 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    Solving problems BrandonHall10's Avatar
    Join Date
    Mar 2014
    Location
    Tucson
    Posts
    3,182
    Thanks (Received)
    10
    Likes (Received)
    146
    Dislikes (Received)
    3
    Quote Originally Posted by WarStryker13 View Post
    I love how simple this truck is.

    ...That's the entire internals of the transmission.

    ...There's a clearer view of the upper gears and the synchros, there's very little indication of the 200k miles this truck has seen.
    Bruh. Where's the valves? Where's the wires? Your trans is missing a TON of stuff!
    Reply With Quote  
     

  4. #43 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    I break things. WarStryker13's Avatar
    Join Date
    Oct 2014
    Location
    Frederick, MD
    Posts
    2,690
    Thanks (Received)
    4
    Likes (Received)
    38
    Dislikes (Received)
    1
    Well...it's not gonna shift itself. Lol

    I asked a couple of people who have rebuilt these transmissions before, this gear set looks like it has less than 50K miles on it. Even the synchros still have relatively sharp edges.

    04 GP GT2: Handling upgrades, go-slow parts, and an attitude. Totaled.
    87 Dodge Ram 50:​ Junkyard rescue, resurrection in progress.
    Reply With Quote  
     

  5. #44 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,701
    Thanks (Received)
    10
    Likes (Received)
    25
    Dislikes (Received)
    0
    it's probably never been power shifted.
    Reply With Quote  
     

  6. #45 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    I break things. WarStryker13's Avatar
    Join Date
    Oct 2014
    Location
    Frederick, MD
    Posts
    2,690
    Thanks (Received)
    4
    Likes (Received)
    38
    Dislikes (Received)
    1
    If you can match RPMs perfectly, you can bang shift without doing anything to the gears. But that's a level of skill and experience that most will never achieve. I'm not planning on trying it with this truck, because I want it to last. The fact that it probably doesn't make enough power to bang shift is definitely not the reason why... Lol

    That being said, the previous owners of this truck at least knew how to drive a standard, and I'm thankful for that.

    04 GP GT2: Handling upgrades, go-slow parts, and an attitude. Totaled.
    87 Dodge Ram 50:​ Junkyard rescue, resurrection in progress.
    Reply With Quote  
     

  7. #46 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    the trick to up shifting is you need to wait for the rps to drop, once the rpm and speed of the tranny is a match the stick will drop right in the next gear.

    same goes for down shifting. you need to slow some first if screaming in top gear, then rev the engine as you go for the next gear down, you can hold the stick on the gear feel it touching the gears ever so lightly and you'll feel the sweet spot, same goes for the up shift, you can feel it, after a little time you just know by ear when its time, no longer need to watch the rpms. after getting good at this a passenger wont know you shifted, it can be so much smoother then jerking the clutch not speed matched. another trick is to double clutch, all that does is waste time while you wait for the rps to drop. good old clutch in pull it to N, clutch in and pop it in the next gear. should not even need to push the clutch to the floor really either double clutching.

    this dont work in new cars, trannys dont like it at all will always grind some chop meat for ya.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  8. #47 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    I break things. WarStryker13's Avatar
    Join Date
    Oct 2014
    Location
    Frederick, MD
    Posts
    2,690
    Thanks (Received)
    4
    Likes (Received)
    38
    Dislikes (Received)
    1
    That's real close to what my dad taught me, but his view on double clutching was until I have a non-synchronized manual truck and actually need to double clutch, I'll be fine with just learning how to pay attention to the truck and going by ear/feel.

    I did get quite a bit done on the truck today, pics incoming on the next post.

    04 GP GT2: Handling upgrades, go-slow parts, and an attitude. Totaled.
    87 Dodge Ram 50:​ Junkyard rescue, resurrection in progress.
    Reply With Quote  
     

  9. #48 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    I break things. WarStryker13's Avatar
    Join Date
    Oct 2014
    Location
    Frederick, MD
    Posts
    2,690
    Thanks (Received)
    4
    Likes (Received)
    38
    Dislikes (Received)
    1
    I (finally) fixed the blown out brake line, had to drop the fuel tank to get to it. While the fuel tank was down, I figured I'd mount the electric fuel pump and take a shower in rust while I'm at it, got the positive lead ran up to the engine compartment. I got the fluid changed in the transfer case, and got the interior nearly completely put back together.

    I vacuumed the bench seat and wiped it down, but it still needs a deep cleaning. Eventually I'm wanting to have the bench professionally reupholstered, because that is honestly the most comfortable bench seat I have ever sat on. So I'm gonna keep it.

    2019-03-15_08-13-48 by Ben Stryker, on Flickr

    I still have to bolt everything back in, but I've still got little things here and there to take care of and that's honestly one of those little things right now.

    2019-03-15_08-13-34 by Ben Stryker, on Flickr

    It feels good to finally be able to sit in the cab without wanting to take a shower in bleach afterwards.

    04 GP GT2: Handling upgrades, go-slow parts, and an attitude. Totaled.
    87 Dodge Ram 50:​ Junkyard rescue, resurrection in progress.
    Reply With Quote  
     

  10. #49 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    she looks clean enough to ride in now.....nice work.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  11. #50 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    GTP Level Member
    Join Date
    Oct 2014
    Posts
    766
    Thanks (Received)
    2
    Likes (Received)
    7
    Dislikes (Received)
    0
    Quote Originally Posted by Scottydoggs View Post
    the trick to up shifting is you need to wait for the rps to drop, once the rpm and speed of the tranny is a match the stick will drop right in the next gear.

    same goes for down shifting. you need to slow some first if screaming in top gear, then rev the engine as you go for the next gear down, you can hold the stick on the gear feel it touching the gears ever so lightly and you'll feel the sweet spot, same goes for the up shift, you can feel it, after a little time you just know by ear when its time, no longer need to watch the rpms. after getting good at this a passenger wont know you shifted, it can be so much smoother then jerking the clutch not speed matched. another trick is to double clutch, all that does is waste time while you wait for the rps to drop. good old clutch in pull it to N, clutch in and pop it in the next gear. should not even need to push the clutch to the floor really either double clutching.

    this dont work in new cars, trannys dont like it at all will always grind some chop meat for ya.
    Used to no clutch shift with my 1980 fiesta while delivering pizzas back in the day.


    Sent from my iPhone using Tapatalk
    Reply With Quote  
     

  12. Likes Scottydoggs liked this post
  13. #51 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    GTP Level Member wowitsfast's Avatar
    Join Date
    Oct 2014
    Location
    portland oregon
    Posts
    955
    Thanks (Received)
    6
    Likes (Received)
    34
    Dislikes (Received)
    0
    Great work! Night and day from the 1st pics from the jy..

    Those 1st pics were defiantly shower and check for scabies and lice after the ride home.

    Now it looks like it's ready to go to work comfy and clean.

    Makes me want a truck again.

    Sent from my SM-N920V using Tapatalk
    Just a bunch of junk thrown together http://www.grandprixforums.com/membe...ht=wowitsfasts
    Reply With Quote  
     

  14. #52 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    I break things. WarStryker13's Avatar
    Join Date
    Oct 2014
    Location
    Frederick, MD
    Posts
    2,690
    Thanks (Received)
    4
    Likes (Received)
    38
    Dislikes (Received)
    1
    The thing is, it cost me maybe $30 for all of the cleaning supplies... It took almost 2 months though. lol

    I've only got 4 things left to do before I can drive this thing: Bleed the brakes, wire up the fuel pump, get the broken bolts out of the lower control arm and put the new front passenger shock on, and wait on parts for the old fuel pump block off.

    You should get a truck. Trucks are awesome.

    04 GP GT2: Handling upgrades, go-slow parts, and an attitude. Totaled.
    87 Dodge Ram 50:​ Junkyard rescue, resurrection in progress.
    Reply With Quote  
     

  15. #53 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    I break things. WarStryker13's Avatar
    Join Date
    Oct 2014
    Location
    Frederick, MD
    Posts
    2,690
    Thanks (Received)
    4
    Likes (Received)
    38
    Dislikes (Received)
    1
    More pics of the interior and how it's currently set up, I'm still looking for a cup holder solution, the current setup is temporary.

    But this is the 3 port 12v outlet in it's rightful place, looking very 80's truck.

    2019-03-16_09-52-16 by Ben Stryker, on Flickr

    I did get the stereo to turn on and made sure it works like it should, still have to trace some wiring and find out where my switched +12v went... But it works and sounds OK with just the dash speakers...

    2019-03-16_09-52-25 by Ben Stryker, on Flickr

    ...And the 10" powered sub behind the bench. lol

    2019-03-16_09-52-34 by Ben Stryker, on Flickr

    Like I said, the bench seat still needs a deep clean and eventually it will need re-upholstered, but I can deal with it for now.

    04 GP GT2: Handling upgrades, go-slow parts, and an attitude. Totaled.
    87 Dodge Ram 50:​ Junkyard rescue, resurrection in progress.
    Reply With Quote  
     

  16. #54 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    needs a CB radio lol

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  17. #55 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    Solving problems BrandonHall10's Avatar
    Join Date
    Mar 2014
    Location
    Tucson
    Posts
    3,182
    Thanks (Received)
    10
    Likes (Received)
    146
    Dislikes (Received)
    3
    Quote Originally Posted by WarStryker13 View Post
    I'm still looking for a cup holder solution, the current setup is temporary.
    Looks like you have the same notch in your bench that I have in my S10. I used a family size can of baked beans, a regular can of green beans, a piece of flat stock and 8 tack welds.





    Mine was just supposed to be temporary also. 2 years later, it's still the best cup holder I've ever used. I drive like an idiot and my water bottle and coffee stay put.
    Last edited by BrandonHall10; 03-16-2019 at 10:50 PM. Reason: Added picture
    Reply With Quote  
     

  18. Likes ItHurtz, Scottydoggs liked this post
  19. #56 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    I break things. WarStryker13's Avatar
    Join Date
    Oct 2014
    Location
    Frederick, MD
    Posts
    2,690
    Thanks (Received)
    4
    Likes (Received)
    38
    Dislikes (Received)
    1
    I'm starting to lean towards the soup can cupholder, but I've got a few places left to look before I give up.

    And yes, I do need a CB... Eventually. lol

    04 GP GT2: Handling upgrades, go-slow parts, and an attitude. Totaled.
    87 Dodge Ram 50:​ Junkyard rescue, resurrection in progress.
    Reply With Quote  
     

  20. #57 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    I break things. WarStryker13's Avatar
    Join Date
    Oct 2014
    Location
    Frederick, MD
    Posts
    2,690
    Thanks (Received)
    4
    Likes (Received)
    38
    Dislikes (Received)
    1

    04 GP GT2: Handling upgrades, go-slow parts, and an attitude. Totaled.
    87 Dodge Ram 50:​ Junkyard rescue, resurrection in progress.
    Reply With Quote  
     

  21. #58 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    GTX Level Member cheatah faheatah's Avatar
    Join Date
    May 2016
    Location
    Rouge Island
    Posts
    1,109
    Thanks (Received)
    3
    Likes (Received)
    12
    Dislikes (Received)
    0
    Quote Originally Posted by WarStryker13 View Post
    MMMMWWWAAAAHHHAAHHHAHHAHAHHAHHAA !!

    And your trans looks just like the gearbox on a drill press from my last job.
    For the record : I am NOT a naked meth-head who shoves rocks up my butt.
    Reply With Quote  
     

  22. #59 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    I break things. WarStryker13's Avatar
    Join Date
    Oct 2014
    Location
    Frederick, MD
    Posts
    2,690
    Thanks (Received)
    4
    Likes (Received)
    38
    Dislikes (Received)
    1
    The open header is much louder than a stock manifold with 2 feet of pipe for some reason... needs at least a muffler before driving it anywhere populated.

    And the throttle linkage fell apart, tiny cotter pin sheared off so I've got that to fix now. But the bed and rear bumper are bolted on, there's two gallons of gas in the tank, and nothing is leaking. I think.

    04 GP GT2: Handling upgrades, go-slow parts, and an attitude. Totaled.
    87 Dodge Ram 50:​ Junkyard rescue, resurrection in progress.
    Reply With Quote  
     

  23. #60 Re: Junkyard rescue of an '87 Dodge Power Ram 50 
    I break things. WarStryker13's Avatar
    Join Date
    Oct 2014
    Location
    Frederick, MD
    Posts
    2,690
    Thanks (Received)
    4
    Likes (Received)
    38
    Dislikes (Received)
    1
    Buttoned up the last few little things, now there's literally only two things left: Exhaust, and getting those two broken bolts out.

    I'm not gonna lie, I've been procrastinating dealing with those... I have a feeling I'm going to end up resorting to fixing it with fire. lol

    04 GP GT2: Handling upgrades, go-slow parts, and an attitude. Totaled.
    87 Dodge Ram 50:​ Junkyard rescue, resurrection in progress.
    Reply With Quote  
     

Page 3 of 14 FirstFirst 1234513 ... LastLast

Similar Threads

  1. anything from junkyard
    By t wizzle17 in forum Wanted To Buy - Parts
    Replies: 5
    Last Post: 07-28-2013, 08:32 PM
  2. Junkyard
    By rocafella2032 in forum Off Topic Discussion
    Replies: 6
    Last Post: 06-18-2009, 01:27 PM
  3. Presidents to the rescue!
    By Big Dave in forum The Rant Forum
    Replies: 7
    Last Post: 10-24-2008, 04:29 AM
  4. Oldsmobile to the rescue!
    By UR LOSN in forum Off Topic Discussion
    Replies: 5
    Last Post: 04-01-2008, 07:09 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •