we have 24 now, getting 20 more, and monday getting like 6 more..ouch
|
Well what I thought would happen.. happened.
So I kept taking the headlights off and on to adjust the beam. Well the bolts I guess wore out the thread on the projectors or something so they don't tighten. They just get slightly hard and then loose again.. Well I thought this was fine until I noticed them bounce more then they did before... Can't tell on the ground but definitely on the backs of cars and signs. Might just get some weather stripping and put them under the lights and connect them to the bumper..
I've taken them on and off maybe 5 times.. kinda ****ty but whatever, just gotta fix it now.
Yea the LED strip is a hit an miss sometimes. But they would be nothing special without them I guess.. You can just not wire them if you want. They come on separate wires from the Halo's. You can also pull them out of the headlight and probably change them out for any color... ohhh I might do red since I have a dark red... hmm this is gonna be interesting.
Yea... MI has a ton of potholes... and for some reason, I can't over tighten now. It'll get semi-tight and then loose again and then semi-tight and then loose. I bought some weatherstripping to put under the headlights. Possibly on my shakey fog lights too.
2 thumbs up i like emm!!
The bolt holes are stripped. Is the plastic threaded or do they use the metal clips?? If the metal clips you can always go to car quest and grab a few of them and replace them.
But...........I knew this was going to happen. Not necessarily the stripping out but the bouncing.
« Previous Thread | Next Thread » |
Tags for this Thread |