Thread: What have you "Jerry Rigged" on your car?

That stuff was just on the grand am, on the explorer, well the temperature control thing went nuts and it would only switch over to heat, so i pulled the little motor out, cut up a sleeve for a from one of those long screws like for a rain gutter, bent it and shoved it in there, serves as a lever to switch it from hot to cold. Anytime you want to switch, you pullout the glove box and turn the lever, who needs automatic climate control anyway? Rivet for the power door lock motor was all screwed up when i got it, was like pulled out of the door, so i forced a screw in the remains of the rivet and its held to this day. Hinges for the rear glass broke off, drilled it from outside and put a bolt through and secured it with a nut on the inside. Fixed the wiring on the power unlock switch on driver side, but sometimes you close the door and it doesn't work, open the door back up and slam it, and it will normal begin working again. Trailer wiring is all kinds of messed up, wired through the tail lights themselves, brake lights and one turn signal work, forget which one does and which one doesn't, ah well. E brake is non existent. I accidently mixed up the hoses on the wiper spayer and when i hit the front button, the rear sprays, and vice versa, too lazy to fix it