I am the nitrous store LOLOriginally Posted by 98bleedingaholevet
__________________________________________________ ____________________
Made some headway last night with the exhaust manifolds. Decided for what I want to do this season, and to expedite the build...fabricating a set of headers just isn't on the menu.
I ended up using the stock front exhaust manifold. I cut the studs and flange stuff off, smoothed the outlet and welded a 2" stainless v-band to the end. The transition into the v-band is a perfect fit. For the rear manifold I ditched the stocker for obvious reasons and found that a passenger side truck manifold fit ok with some work. I chopped off the outlet right at the last primary and added a 2" sch10 transition that wraps around the transmission and reduces down to another 2" v-band. I am very happy with how they came out.
Now I just have to media blast/ coat them and build a crossover.
