Here is a good way to show the before and after of the pinstripes.
Next up was to Remove the pinstripes. I took an hour or so. I used isopropyl alcohol and a heat gun and my fingernail. In the below pic the pinstripes were just removed and i decided to give it a good wash
Remember me saying the back bumper was a fake? I located a real one that was on ebay and came from moradparts. It was a daytona one that was guaranteed to match my paint
See how the color did not match? It was even worse on the passenger side but this was the only pic i could find.
And now for the new bumper installed.
More rear bumper ass update shots to come in later pics in the thread
I then was sick of my tail lights and wanted my lower front fasica to be black and the rear bumper to black was well so i started painting and polishing my stock tips which still wasnt good enough for me...
So i started painting and even attempted to VHT nightshade them two shades darker. I wasn't impressed for very long lol
This picture is NOT mine but it was the picture that inspired me to get my bumper the way it is today as you will see in later pictures. Only thing i have different is LED tails
I ended up with something like this
I then got my LED tail lights installed and went to my girlfriend's farm where i ran into the old GTP that i sold her relative and got side by side shots. How rare is that???
Here is his GTX hood which is i really loved, but then i get to looking at his interior and rust and i was like THANK GOD i sold that car!!!
Then i decided to Wrap my dash in 3m Dinoc carbon fiber vinyl. I made a thread on it but just to save you the trip it took me about 12 hours total to cut and wrap and heat etc to get it the way it turned out. I since then removed it and had it painted gloss black which you will see in later pictures.
