Thread: Southeast WI 01 GT

Originally Posted by Bio248

if you did anything with the throttle body you'd switch to the 99+ MAF sensor and completely knock out that center section and clean it all up. porting the throttle body is pretty easy, but you're almost guaranteed to break through the casting and have to fill in places with epoxy/jb weld/etc.

but as stated, you'll have to get the car tuned for it or it'll run all kinds of dumb.

I took down the little ridge between the front and back of the TB. Not enough to break through in any places. Just a nice flow now from intake through TB. Left the center piece alone. Maybe someday down the road i'd mess w/ that but i just want to get this stupid thing running. Been apart so long i'm worried i wont remember how to put it back together.