Thread: Finally upgraded

That's what I wanna do my cone and stock tubbing are the same size how can I put it on? Just take everything out and put in on the TB? And where would the censer go?


Sent from my iPad using Tapatalk

I just bolted the filter to the rubber tube.

I trimmed off the excess that wasn't needed on the factory piece.

And yes, remove the entire box and/or the tube, and install the cone filter. The IAT sensor can go close to the filter, it's gonna be hot regardless where you mount it really, so just zip tie it somewhere.

sorry for the crappy night/iPad pic... I got the intake on last night at 8:00 after work and also plasti dipped the dash pieces won't have any pics up until after work today!

Alright new pics!!


(excuse the dirty filter) only problem I'm having is the cone keeps vibrating off and causing a service engine soon light for a vac leak

Buy a rubber coupler and pvc pipe and it won't come off anymore.

Ya I'm leaning towards that but it will have to wait till the end of the week. Also flipped the dog bones bushings because I was bored and it was super easy

Originally Posted by Scottydoggs

chrome or silver is where id be at.

This is what I would go with on the wheels. Would look better against the dark green color.

I like the chrome on the big 5 spoke wheels I have but I don't like the flat silver ones an I've seen some black 5 smokes on here that look good on green gps

Ok so I got a problem my air quit working all together. I checked all the fuses and they're all good I turn it up and down and I can hear everything working I just have no air at all

Blower resistor and motor maybe? Mine just went out a couple weeks ago, I replaced those and now it works better than before.

Well haven't really looked into the air problem yet just been using the sunroof more lol. Had another vac leak and it wouldn't go above 45mph without cutting out sooooooooooo it took me like 15min and once I get some gold high temp paint I'll b set

I have a problem sometimes when I get up to about 40 mph it seems like the rev limiter kicks in but ik it's not that. If I shut it off look at open the hood look and start it again it's just fine. Idk what to think. The abs light comes on as well it wasn't on when it did this then after I shut it off and turned it back on the light came on an it was just fine?

Sooo i scanned the codes and I got the P1404 code it said the EGR valve is stuck open what steps do I do to fix this? I've looked around and I wanna clean it and see what happens before replacing it

I've bought some gold paint what parts should I paint to accent my green color?

calipers

I've been kicking that idea around with black wheels soon

don't go black wheels. they will look small. if anything go some 18-19" gold wheels

Well I originally bought the paint to do the wheels but idk if I'll like it


Sent from my iPad using Tapatalk

Do plasti dip to see if you like it. Cause that's reversible

Update! Car is running fine could use an oil change but that's all. De-badged the whole car
Painted the GT badge gold and made a GP badge and put it on the grill

thought this was kinda cool that's it for now I'm having a gold pontiac emblem put on the sunroof today I'll post a pic tomorrow