Thread: Question... NO

seal coat.... really?!!? interesting

we did that at a garbage co i worked at, the lot was all dirt, we got truck load after truck load and spread and rolled it out. the garage area they did extra nice and seal coated it, with home depot raceway driveway sealant. looked damn good.

the rest of the lot we washed down with a fire hose.

Yeah Sealcoat Works real good one guy I know used Sealcoat cut with diesel to soak into the asphalt let it cure for a little while and then seal coated on top

it tends to be free or super cheap, you only seem to find it when your local roads are being re done as far as i can see. unless you can find some local dump truck out fit that hauls millings. what we call it here. who knows what they call it west of the old miss lol

The die cast aluminum elbows need to have the O-rings removed and the casting flash in the O-ring Groove cleaned up
Otherwise they seem to leak a little due to slight misalignment in the die parting line

Originally Posted by SgtMarshal

is this crushed asphalt easy to come by, and how much does it cost? I have a gravel driveway that needs a bit of help.

It cost me $290ea delivered for "about" 27,500lbs. The first pic was load one, the 2nd pic with the big mound was 18 wheeler #2. So $21 per ton give or take delivered.



I am gonna have to try this seal coat thing, getting me all excited.

the smoother you can get it before hand the better, like drive the piss over it on a few hot days with a loaded truck, you need to get every where not just the path you take, or you'll have ruts fast.

ugh, we shall see

Didnt do anything today so I got bored and started touching things.

SOOO I delete the cruise control box
20160726_160433 by Corey S, on Flickr

Then saw my collapsed air filter, ***** little filter cant handle me
20160726_160558 by Corey S, on Flickr


So because I dont have a/c I relocated the pcm to the inside frame and started cutting. If I find this fcking die grinder that keeps evading me somewhere I can finish up the hole and go from there. I shall call it my deep turbo fender intake with muuuch bigger filter one day
20160726_160446 by Corey S, on Flickr

looks like it got beaten in on one side, sure it's not hitting anything inside there?

lol and that's alot of leafes all over. you should clean it.

Above the hole it where that filter has spent its life, nothing to hit but itself


The leaves I thought about it, then decided meh. Ill shop vac it eventually

huh. ***** little filter then. lol

lol I can't stand having crap in the windshield vents, makes the A/C smell funny. I need a new cabin filter lol

The uglies
Couple oven cleaner soaks
20160728_164323 by Corey S, on Flickr
20160728_174245 by Corey S, on Flickr
20160728_174513 by Corey S, on Flickr
20160728_174501 by Corey S, on Flickr
20160728_174117 by Corey S, on Flickr
20160728_174134 by Corey S, on Flickr
20160728_173952 by Corey S, on Flickr
20160728_173427 by Corey S, on Flickr
20160728_173349 by Corey S, on Flickr
20160728_173404 by Corey S, on Flickr

20160726_225553 by Corey S, on Flickr
20160801_165651 by Corey S, on Flickr
20160801_165658 by Corey S, on Flickr


20160801_162851 by Corey S, on Flickr
20160801_162927 by Corey S, on Flickr
20160801_164307 by Corey S, on Flickr
20160801_165306 by Corey S, on Flickr
20160801_165241 by Corey S, on Flickr
20160801_165725 by Corey S, on Flickr


Just a quickie 15min to get the ball rolling, yes the heads still assembled but I wanted to break the ice with myself, **** cuts pretty quick.

Cook till golden brown?

get the valves out of there and a light on the other side so you can see better.

Originally Posted by BrandonHall10

Cook till golden brown?

Ya, should come out good at 425°, I like a crispy skin

Originally Posted by Scottydoggs

get the valves out of there and a light on the other side so you can see better.

Ya I will when I go back, just wanted to get over the "scary" part of starting.