spit and bubble gum comes to mind lol
just whats holding that fitting to the pan? can you unscrew it and roll the hole back to shape?
|
02 camaro lim is kind of a pita, dam factory engine brackets. That and my brother giving me upper injector orings for the bottoms and took me 1hr to figure out why I couldnt dam the injectors in the hole
He wanted to paint it, dam dirt soaked engine, such a pita to clean
20160227_152838 by Corey S, on Flickr
I bet your enjoying that bracket with 2 bolts looking at the firewall aint ya bro!
20160227_124504 by Corey S, on Flickr
This is taking to long, time for a break, gp is soaking up the rays for no apparent reason
20160227_125036 by Corey S, on Flickr
Walla. I did forget to hook up the alternator he was about to drive away and asked me why his gauge was in the red lol. Quick reconnect and a jump start and he was on his way. I have 23 cuts and tears on my hands dam cowl.
20160228_163636 by Corey S, on Flickr
engine accessories like CAKE! back vc bolts, upper intake back bolts,fuel rail, fpr is in the back, map sensor all a *****!
I feel like I could do the gp's in 30 seconds after this thing.
Looks like fun! lol
@2nd picture, I spy a LG G4, good choice in phone. Whoevers that is...
My brothers phone, I dont beleive in the super fancy smartphones.
why dont you wave to me anymore cory
Your always hiding palmer, I never see you anymore
As for the pan I punched the metal back around the fitting and black rtv'd it, ya ya. I am allowed a temp half ass at least once on the car.
Let the engine warm up to temp, no gas smell check, drain check.... small puddle of oil forming not check.
Jacked it BACK up, too tire off and while running found the leak. Turbo FEED line plug was dripping minimum 1 drop per 2 seconds, no idea how long this was going on, gravel driveway sure as hell dont show me anything.
60% of the spill was because I took the plug out and it drained the feed line
20160306_161110 by Corey S, on Flickr
Cleaned the copper rtv off, cleaned the hole and after some browsing the web settled with this
20160306_160635 by Corey S, on Flickr
20160306_162106 by Corey S, on Flickr
I will let it rest of today and monday and find out tuesday. Looking at the pic, my guess its been doing it for a while haha
20160306_162606 by Corey S, on Flickr
Car greeted me as I walked past it this morning. New pan it wants
Maybe I can drive it again in april.
20160307_092203 by Corey S, on Flickr
Thanks but I already ordered one, should be here next week.
I wonder how pissed the neighbors will be,eviction then bid trashout because debri is over 60yds. Its going to sit like this allllll weekend.
20160310_155925 by Corey S, on Flickr
Yup house on the lake, dock and all. Gotta love it.
20160317_145208 by Corey S, on Flickr
20160317_145223 by Corey S, on Flickr
New pan all done up
20160317_134740 by Corey S, on Flickr
20160317_134748 by Corey S, on Flickr
Shouldnt be breaking this anytime soon!
20160317_134813 by Corey S, on Flickr
Scottys way is better
20160319_173735 by Corey S, on Flickr
Hello
20160319_173840 by Corey S, on Flickr
Hi piston
20160319_173854 by Corey S, on Flickr
Scotty the chain says "sup"
20160319_173924 by Corey S, on Flickr
20160319_181936 by Corey S, on Flickr
Wo hoo
20160319_182010 by Corey S, on Flickr
Oldd
20160319_182101 by Corey S, on Flickr
Oops
20160319_182111 by Corey S, on Flickr
Atleast the old pan came off the fitting!
20160319_182846 by Corey S, on Flickr
pans torqued, tmw put bracket and mount back on then I HOPE to drive it again
« Previous Thread | Next Thread » |
Tags for this Thread |