Basically a wire stripper and a solder gun. Let me see if I took pics.
Sent from my HTC One using Tapatalk 2
|
|
09-13-2013
Basically a wire stripper and a solder gun. Let me see if I took pics.
Sent from my HTC One using Tapatalk 2
09-13-2013
hope ya did lol
Originally Posted by Bio248
Originally Posted by Kilroy
09-13-2013
Ok this is what I got.
I will try to make this simple as possible.
First you need to get the part for the link. It's like 3 bucks from radioshack.
After opening the radio you'll find the connector shown in the picture. The one with the red wires and the one blue wire.
Now if you follow the instructions on the link you'll find that the first wire and the third wire has to be cut in half.
Now you Have two cut ends going to the cd player and two ends going to the main board.
Connect the appropriate wires to the main board and cd player and connect the ground wire to the chassis and Bam!
You have done it lol.
Yup. I did the best I could Lls any questions ask me lol
Sent from my HTC One using Tapatalk 2
09-16-2013
update time!
plugs and wires and trans drop and filter change will be done this week. finally lol.
trying to squeeze more mpgs out of the prix, im averaging 17 in the city but im sure its time for a tune up. cylinder 5 is misfiring so might as well change em all lol.
also going to order some hids for the fogs to blind the road a bit lol
Last edited by Bluemagic; 09-16-2013 at 10:06 AM.
09-27-2013
I'm back!
Had a few life hiccups and slammed at work with training but I'm back! Lol
Update in a few hours :-)
Sent from my HTC One using Tapatalk 2
09-27-2013
Painted the blower, need to do more accents in the engine bay. Ideas?
Sent from my HTC One using Tapatalk 2
09-27-2013
paint the alt, the dog bones the same color as the blower and do something with the valve covers
Originally Posted by Sven The Sexman
09-27-2013
Valve covers!!!!!! Dog bones !!! Fuel Rails!! The whole thing what theme are you goin for? For a cleaner look I would put those sparks plug wires under the supercharger instead overtop of them I'd paint the pulley too along too with the 2 colors you choose
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
09-27-2013
Good point lol. Not that I see the wires it looks sloppy Lls
Sent from my HTC One using Tapatalk 2
09-27-2013
Paint the Dogbones that same color. Then paint the vc a solid color like silver or black.
Leave everything else stock. It's a cluster kfuc when everything is painted.
09-27-2013
Guess ill do that when I replace these mounts with my solid ones. That vibration is annoying
Sent from my HTC One using Tapatalk 2
09-28-2013
It's coming along nicely..
Sent from my HTC One using Tapatalk 2
09-28-2013
Installed some solid mounts. No more vibration lol.
Need a new intake pipe to get rid of the old one and I think a coupler is needed as well. I hear rattling by the snout
Sent from my HTC One using Tapatalk 2
09-28-2013
What happened to your cross braces?
09-28-2013
Oh I removed them for painting, just ran out of paint lol
Sent from my HTC One using Tapatalk 2
09-28-2013
Nice paint color man thank God I didn't grab the orange that day lls don't wanna copy your setup looks eye grabber there!!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
09-28-2013
Lls thanks manNice paint color man thank God I didn't grab the orange that day lls don't wanna copy your setup looks eye grabber there!!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Sent from my HTC One using Tapatalk 2
09-29-2013
And that color is perfect.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
