Ohh lala must share if it works haha. I'm sure machine gun squid can use it too. I seen his thread about his ltft s but Idk if it's from the breather or not.Quote:
Originally Posted by Iceman6669
Printable View
Ohh lala must share if it works haha. I'm sure machine gun squid can use it too. I seen his thread about his ltft s but Idk if it's from the breather or not.Quote:
Originally Posted by Iceman6669
Well basically I think I will attempt a setup like a SBC uses.
If you are shooting to be as low as I was, you need a full set of spacers, I never investigated how much hood clearance that I had after adding the spacers.
just cut the hood, no one will notice....but seriously, add the spacers, go to walmart, buy play-doh, make tiny towers of clay on the supercharger (about the height of how much you will add with the intercooler, close the hood, see how much clearance you have.
You might be able to mod the hood beams underneath for an extra 1/2" if you need it.
That's also what I was thinking last night, was to cut up the hood. N I seen before where someone said buy some clay n trace where I'd need the clearance. Like you said, no one would ever see it. And I seen where you shimmed your hood up in the rear before. I've been thinking to just use it and buy the other things as I go n not be in a rush. As long as it's on by summer I'll be happy.Quote:
Originally Posted by Drunkie
Eh just run no hood
We could always do that too!Quote:
Originally Posted by Alix0r
well if you aren't going to run a hood I'll take it off your hands :D
Ok lets talk serious, the hood looks kick a$$ on your car, and cutting the hood would be a task. And I am almost positive you dont want to risk scratching and denting up the new intercooler. With that being said, I mean, I could take that intercooler off your hands ;) This seems the most logical way out, right? hahahaha
Haha sure, lemme get it painted for you first though brotha!Quote:
Originally Posted by dsmuts
Haha well see. I'm going to run cradle spacers n a full stack of vinnie spacers most likely. If it needs to be raised up a little higher on the coils then that's what it'll be. Well wait n see by spring/summer..Quote:
Originally Posted by Classy Pontiac
Well ill be ordering my control arms this upcoming week and then I'll just need a new front sway bar.
also got bored n did a little walk around the car with my go pro. Still waiting on my suction cup mount for it.
http://m.youtube.com/watch?v=oVMY03Cznjo
n that damn annoying belt squeak is back. I had it last winter too n replaced both belts not even a year ago. I think it's just from washing it n water getting in there.
Is that a tractor running or your car? Jk looks good brotha, and cant wait to see it slammed! Tint the tails lightly maybe?
Sent from my iPad using Tapatalk
Haha might as well be, it plows snow. Maybe in the future, I'd have to experiment more with vht first though.Quote:
Originally Posted by xxpappas13xx
I wouldn't use vht because people say it comes out like a purple color, use rustoleum. But haha it looks good though!Quote:
Originally Posted by GrandPrix06GT
Sent from my iPad using Tapatalk
I used VHT and mine came out black..
You know if you lower it enough you wont need spacers or short dbs :)
Can anyone tell me if I will definitely need alternator relocation brackets for a fsic install. 04+ obviously, or if need be can I just cut the cores connection spot shorter to where I can place a 90* elbow?
I'll find out in a few weeks
Lol alright, reguardless, couldn't we just cut the core fitting shorter, as long as it got tightened good enough, because it flares out to help hold.Quote:
Originally Posted by dsmuts
I'm not sure I'd have to look at it some more
Got some goodies today..turndown and billet fuel logs!
http://i1272.photobucket.com/albums/...psiliaeb51.jpg
and getting there on gasket matching the lim
http://i1272.photobucket.com/albums/...pslax8zanz.jpg
http://i1272.photobucket.com/albums/...psiwc1zfyt.jpg