Plug was fine but I might just go buy one at harbor freight.
|
|
02-25-2013
Plug was fine but I might just go buy one at harbor freight.
02-25-2013
was that not you who found 2 messed up plugs? i cant do 6 pages lol forgive me if im wrong lol
02-25-2013
Yeah 2 messed up. I'm thinking they were original plugs though so I'm not sure if it's due to age or not.
02-25-2013
only because of them plugs do i say to check the pistons.
02-25-2013
Yeah they had me nervous. I took it for a WOT run today and it only has 4* of KR at the most. I don't think that's to bad for having a bad lifter.
02-28-2013
My ect sensor went bad today I was driving and I noticed my gas mileage went down a lot so I looked at the gauges and the temp gauge was all the way down. Hooked up my scanmaster to it and it was reading -10 and idling at 2K rpm guess what i'll be doing tonight.
03-02-2013
Well I cleaned up my tips today. It only took about 2 min to do it but they look a ton better.
I also went and picked up 6 qts of oil today I saw on fb for sale for $12. On the drive home I took the long route and beat the tar out of it and the lifter quit ticking so I'm pretty happy about that and it didn't have any KR until about 80mph until about the 3rd or 4th pull then it started getting blips here and there since the car was getting hotter.
I also pulled my cabin air filter (that white stuff is mold) and fixed the water deflector since it was off and laying there. This should take care of the water on my floor board problem.
03-02-2013
Coming along nicely...
Sent from my Samsung Galaxy Note II
03-02-2013
My filter looked like a bowl from getting wet but jesus that some serious black nasty. Did you actually have the revised cowl deflector or just the rubber strip?
Those snouts look better. So you thinking the 32 Might have a few good miles left in it?
Badges gotta go
03-02-2013
I just have the rubber strip for now. I think the L32 is here to stay she was running good today. Debadge will happen eventually.
03-04-2013
Added an open cone today I got for $20 at autozone. I guess I need to update my running total.
03-04-2013
and another 5 bucks for engine de greaser and clean that bay up.
the engine its self looks pretty clean, the bay is real dirty.
03-04-2013
Yeah I have a can of gunk in the garage just have to get around to doing it lol
03-04-2013
Sweet zipties.
03-04-2013
Thanks I got 1000 for like $5.
03-04-2013
loving everything about this car.
wish you'd have picked this up sooner, i found a Comp G i was pulling parts off and could've helped you out if needed anything.
well anyways!
glad to see that it car run and operate under its own power so it gives you some time to tinker and work out all the small stuff, so when you do swap over motors and what not, you'll have a good base to work with
03-04-2013
How you get that air intake filter for $20? around me they are $40 autozone or advanced.
03-04-2013
I had a $20 reward at az.
My idler pulley locked up today luckily I had one laying in the garage so I got that swapped out tonight. I think I'll pull the valve cover wed or thur. I really want to see what's up with the ticking.
I took it for a WOT run to about 80ish tonight with the new air filter on and had absolutely no KR at all. I guess that's what happens when you replace a dirty old air filter. It feels strong and if it wasn't ticking you wouldn't even know anything was wrong with it.
03-09-2013
Took it through the car wash last night and the map light was leaking like hell so I pulled the on star antenna off and sealed it up today which lead to me pulling the seats and cleaning the mold off them. Then I detailed the interior a little bit.
I also got some go fast goodies
03-09-2013
Shiny shift knob you have there....those onstar leaks are a GM joke aren't they
Excuse my ignorance but why the new heads?
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
