Quote Originally Posted by BillBoost37 View Post
I'd have some suggestions if I knew what the eff you mean to say, because...this ~~~> "bolt, in...bolt out..bolt bolt.. " isn't getting the point across.

Sounds like you flubbed the job somehow and since you mention heads, a bolt is broken in a head. (correct me if I'm wrong, or tell me if I'm right. I'm doing some serious decoding and translation here!). If so..and it's almost out. Use a punch or small screwdriver and make a mark on one side of the bolt. Then tap in a counter clockwise fashion and likely...it'll pop right out.
Ok sorry had the girlfriend over yesterday when I was typing that and she kept bugging me but yeah Bill sorry I busted the bolt into the head went to tap it out but at the last second the drill bit broke and a piece of the Carbonite drill bit is still stuck in the head with the last part of the bit and I tried to drill that out but its not doing a thing, so I'm going to try a few more things to get it out before I buy a used head, anything I could use to get the bit out?