I just got my headers on . Tip take sway bar out and use a tie down strap to pull the motor all the way to the front of the car .
1. Take dog bones off
2. Take stocks off
3. Take sway bar off
4. Take a tie down stap and winch the motor as far forward as possible and put the rears on first
5. Put mid pipe on and run it under the brake boster not to the side of it
6. Put front header on and make sure it's on the mid pipe while you bolt it down it'll be tuff .
7. Finish up withe the loos ends and clamps is recommend getting band clamps
Also the mid pipe is a pita I kind of had to wiggle it and use some force to get the pipes to deal completely
Other than that it'll be straight forward
Good luck getting your resonated bolts out after they break off ..
Originally Posted by Utter99
