flaming skull or LE GP one
|
|
06-19-2012
flaming skull or LE GP one
06-20-2012
ok so i tried to make custom inlays - just testing and might have found one way - and since these are just tests it didnt matter which pic i used.
1st and 2nd pics is 5 min epoxy - did not work with a dam
3rd pic is using CA Glue - 15 hours still not dry - but clear.
06-20-2012
this literally made me laugh out loud....jeez. but yeah i agree. thats the whole point of forums is to talk about our rides and help each other out. i dont think anyone was being a dick more like constructive criticism and to tell you how today's styles are....personally for me i dont like it b.c it sticks out bad. anything u do wrong ur car can be identified so easily. My car is stock but looking to do nice mods but nothing drastic to make it pop out.Originally Posted by slick2500
06-20-2012
Ya i laugh at alot of the comments.
But I like most of the mods i do.
Everyone can not like the same - in my case the percentage is lower, but it doesnt bother me.
06-20-2012
Did you contact Ray for help? He makes those center caps
06-20-2012
no, i didnt, just testing to see what works
06-20-2012
i think that site addy is wrong.
06-20-2012
Instead of trying the epoxy or glue go to Lowes, Home Depot, or someplace local and similar, get a piece of clear acrylic and use a dremel and some sand paper and cut out a circle the right size and use some clear glue to glue your image onto the back side. It will protect it best, be cost efficient and right up your alley. Otherwise, a local vinyl shop could probably print you out several round cut stickers with that printed on it. Save a Jpeg file on a flash drive, take it to them, let them pull it, cut print and be done for about the same as the acrylic.
Last edited by blueguy; 06-20-2012 at 05:56 PM.
Originally Posted by AmericanSoldier
06-20-2012
yeah, just put the sticker over top of the current centre cap
hell could probably buy sticker stuffs from staples.
06-20-2012
Regalgs.org silly
06-20-2012
I bought some clear polyester casting resin, this stuff will work.
Last edited by blueguy; 06-20-2012 at 05:56 PM.
06-20-2012
Those will
Some bad ass 15s
How wheel gap u got?
06-20-2012
ok just dont understand that at all.
06-20-2012
He's saying bad ass rims.
He is also asking how much wheel gap there is before you lower it.
06-20-2012
wow. Sorry. Serious iPhone/tapatalk fail right there
06-20-2012
im going to have to measure the gap
and for the center caps, i think i want to go with
06-22-2012
Ok more blue -
06-22-2012
Wheel gap from wheel well to tire is about 4 1/2"
06-22-2012
Not bad for stock wheels. How about with your rims mounted with the low pro tires?
06-23-2012
dont know.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
